boiler feed pump oil baffle 3FK5F32M-06-04 is an important accessory for the boiler feed pump in power plants.

Water supply pumps can be used to transport clean water or liquids with physical and chemical properties similar to clean water. They are used for medium and low pressure boiler water supply pumps and are also suitable for high-pressure water supply and drainage in factories or cities. The temperature of the conveying medium is -20C ° -150C °, and the allowable inlet pressure is less than 0.6MPa.

The water supply pump adopts a hydraulic model of high-efficiency and energy-saving products recommended by the country. It has the advantages of high efficiency, wide performance range, safe and stable operation, low noise, long service life, and convenient installation and maintenance.

The inlet and outlet of the water supply pump are vertically upward, and the pump casing parts such as the inlet section, middle section, outlet section, and bearing body are connected together by tightening bolts. Select the number of stages of the pump based on its head. The rotor part of this type of pump mainly consists of a shaft, an impeller installed on the shaft, a shaft sleeve balance plate, and other parts, among which the number of impellers depends on the number of stages of the pump. The parts on the shaft are fastened with flat keys and shaft nuts to form an integral part with the shaft. The entire rotor is supported by rolling bearings or sliding bearings at both ends. Bearings are determined by model and do not withstand axial force, which is balanced by a balance plate. The pump allows the rotor to move axially in the pump casing during operation, without using radial ball bearings. Rolling bearings are lubricated with grease, sliding bearings are lubricated with thin oil, and self-lubricated with oil rings and cooled by circulating water.

 

 

Valve Spring 8-YT668Y64150

Valve seat 6-YT668Y64150

Retaining Ring YT668Y-64

coupling 2CY45/9-1A

Thrust ball bearing 51264（CK884-LM）

Feedback plate 6DR4004-6J

motor servo valve 743F-003A

Solenoid valve 8030G66\220VAC

Solenoid valve 8223G003\220VAC

Solenoid valve 8223G005\220VAC

Solenoid valve 8262H090VH\220VAC

Packing for globe valve B04-9076Z-02TS

Packing for globe valve B05-5076Z-06TS

Packing B05-8076Z-06TS

Packing kit B05-8076Z-34TS

Packing B06-5076Z-34US

Packing B06-9076Z-34US

Packing B10-9076Z-02TS

Helical gear oil pump CB-B200 1450r/min

Solenoid valve coil CCP 024D

servo valve G761-3600

Circulating pump F3-V20-1S8S-1C11

gear pump CBK1032-B1FR

Joint CSHM 1/4NPT

Joint CSHM 14×1.5

High pressure hose for Stator cooling water pump YCZ50-250C/L=600mm

Reheat system electric drain valve J961Y-64 540℃ DN50

Main steam system electric drain valve J961Y-64 540℃ DN65

Main steam system electric drain valve J961Y-P54 64V DM65 P54 6.4MPA

Reheat system electric drain valve J961Y-P54 64V DN50 P54 6.4MPA

MECHANICAL SEAL (NDE) LTJ-GJ-125A/L

MECHANICAL SEAL (DE) LTJ-GJ-125A/R

Screw pump NSNF210-40

Screw pump NSNH940R46

Main oil pump WT7710 NK32/36/48

Screw pump HSNH440-46

DFYLSYC-2023-05-08-A