China factory made generator stator cooling water filter KLS-100I
Date:2023/6/15 9:21:32 Visits: Author:Dongfang YOYIK Engineering Co; Ltd,China factory made generator stator cooling water filter KLS-100I
DESCRIPTION
The generator stator cooling water filter KLS-100I of the cooling water pump is an advanced and easy to operate water filter element, driven by an electric motor for automatic cleaning. Water enters the coarse filter screen from the inlet and flows out through the fine filter screen from the inside out, causing impurities to accumulate on the surface and causing an increase in pressure difference. The coarse filter screen is designed to protect the cleaning device from damage caused by large particles. The filter starts the automatic cleaning process when the preset pressure difference or time expires. Filter cleaning is carried out through a rotating suction scanner, which sucks impurities away from the filter and discharges them through a drain valve. The entire process takes about 15-40 seconds, with continuous flow during this time.
MAINTENANCE OF FILTER KLS-100I
KIS-100I stator cooling water filter element is used to filter impurities and dirt in cooling water to protect important components of the generator stator. To ensure the effectiveness and long-term use of KLS-100I stator cooling water filter, the following points need to be noted:
1. Regular replacement of filter element: The stator cooling water filter element needs to be replaced regularly to ensure its filtering effect. In general, it is recommended to replace it at regular intervals (such as every three months);
2. Pay attention to the applicability of the filter element: When selecting the filter element, it is necessary to pay attention to its applicability to ensure that the selected filter element can adapt to the current water quality and usage conditions.
3. Regular inspection: It is necessary to regularly check the effectiveness of the stator cooling water filter element, such as the degree of pollution and filtering effect of the filter element, and promptly identify and handle problems;
4. Ensure normal water supply: The stator cooling water filter element can only operate normally under normal water supply conditions, so it is necessary to ensure the water supply and quality of the cooling water;
In summary, the stator cooling water filter KLS-1001 is an important protective component of the generator and requires regular maintenance and replacement to ensure the normal operation and service life of the generator
REGULAR MODELS
Filter EH BR110+EF4-50 (UN1 1/2)
generator stator cooling water filter WFF-150-1
oil pump discharge filter JCAJ001
oil pump suction filter JCAJ007
actuator working filter DP201EA03V/-W
generator stator cooling water filter MSL-31
stainless steel Punch filter KLS-50U/80
actuator filter with o-ring DP2B01EA10V/-W
diatomite filter DP930EA150V/-W
Precision filter SH-006
PRODUCT PICTURE
RELATED PRODUCTS
 |
 |
 |
 |
| oil filter ZCL-I-450-B | temporary filter ASME-600-150A | generator stator cooling water filter MSL-125 | Regeneration Device Diatomite filter 30-150-207 |
Please contact us if your need is not listed above. SEND EMAIL
filter,water,Stator,fiter,cooling,Generator,element,manufacturer