"The method of using the LVDT Position Sensor C9231129 is as follows:

1. Install the sensor: install the sensor on the hydraulic cylinder according to the requirements, make sure that the sensor is perpendicular to the piston rod, and ensure that the sensor is installed firmly and reliably.

2. Connect the cable: Connect the sensor cable to the controller or data acquisition device and make sure the cable connection is secure.

3. Calibrate the sensor: For the stroke sensor of the oil motor with analog signal output, it needs to be calibrated. The calibration method is generally automatic or manual calibration through equipment or instruments.

4. Detection sensor: Before the official use of the sensor, it needs to be detected to ensure that the output signal of the sensor is consistent with the actual stroke.

5. Monitoring sensor: During use, the sensor needs to be regularly monitored and maintained to ensure its normal operation.

 

It should be noted that the installation and use of the LVDT Position Sensor C9231129 needs to follow the relevant specifications and standards, such as the national standard GB/T14622 Technical Conditions of Stroke Sensor and GB/T14623 Testing Method of Stroke Sensor. At the same time, attention should be paid to the sensor's ambient temperature, humidity, electromagnetic interference and other factors to ensure the stability and accuracy of the sensor. 

 

TAP POSITION INDICATOR ET-SZ5A

INDICATOR, DIAL, OILTEMP BWY-804JJ

Seal Kits for Plate heat exchanger NT150SCD-10 65

Air line Regulator R74G-4AK-RMG

Water Analyzer Transmitter CM442-45T 8/0

Speed Transmitter N12B

Differential pressure transmitter 3051DP2A62A1BM5B4HR5

Differential pressure transmitter 3051DP3A62A1BM5B4HR5

Differential pressure transmitter 3051DP4A62A1BM5B4HR5

Pressure Transmitter 3051GP1A2B21BB4M5HR5

Pressure Transmitter 3051GP2A2B21BB4M5HR5

Axial Displacement Transducer ɸ Eddy Current Transducer(Axial Displacement) M14 X 1.5

Electrical actuator with motor ZHB1600-25

Electrical actuator with motor ZHB800-25

Electrical actuator with motor ZHB2500-25

Micro Plate Heat Exchanger D62-80

Differential Pressure Transmitter 3051CD1A2B21AM5B4Q4

Pressure Switch HLP803

DISPLAY UNIT NPXM-2011P5N

Transformer DG-4000VA

Transformer DG-3500VA

MACHINERY PROTECTION CARD MPC4 MEGGIT

TEMPERATUR DIGITAL DISPLAY XMTJ-2032

PARKER LUCIFER 322H35

TEAR PROTECTION SENSOR XD-TQ-1

GEAR BOX COOLING TOWER LF92 - 400A

THERMOCOUPLE WRNK2-433N

ZIRCONIA SENSOR + TRANSMITTER Z0-12B + Z0-12Q

DFYLSYC-2023-04-17-A