Diatomite regeneration inline filter element ST718-00-03ZXCO uses ion exchange resin to remove acid. This method of acid removal has been popularized in regeneration equipment for a long time. The technical conditions are mature and stable, and it can be widely used in power plants.

But you should also pay attention to observation during normal use: after regeneration treatment for a period of time, the adsorbed impurities are close to saturation, and regeneration treatment is required. Ions and other impurities adsorbed by the resin are eluted and removed with chemical reagents to restore their original composition and properties. In practical applications, in order to reduce the cost of regeneration, it is necessary to properly control the amount of regeneration agent to restore the performance of the resin to a more economical and reasonable regeneration level. If a higher regeneration level is to be achieved, the amount of regenerant will be greatly increased, and the utilization rate of regenerant will be reduced.

 

 

filter HY-125-001

filter HY-125-002

filter HY-3-001

filter HY-3-001-HTCC

filter HY-3-002HTCC

filter HY-R501.300.10ES

Oil purifier coalesce filter ILX-15-85

filter ISV90-800*180MC

oil suction oil filter ISV90-800*180MC

filter IX-100*100

coalesce filter 1200498

filter 0F-3-10-3RV-10

filter IX-100*180

filter IX-100*80

filter IX-1000*100

filter IX-1000*180

filter IX-1000*80

filter IX-160*100

filter IX-160*180

filter IX-160*80

filter IX-250*100

filter IX-250*180

filter IX-40*100

filter IX-40*180

filter IX-40*80

filter IX-400*100

filter IX-400*180

filter 1.V.901G20

filter IX-250*80

DFYLSYC-2023-04-12-A