China manufacturer and supplier Generator slot Sealant 730-C
Date:2023/8/16 9:20:17 Visits: Author:Dongfang YOYIK Engineering Co; Ltd,China manufacturer and supplier Generator slot Sealant 730-C
DESCRIPTION
The generator slot Sealant 730-C is used for groove sealing of hydrogen cooled steam turbine generator end covers, outlet covers, and other groove type seals in thermal power plants. This sealant does not contain dust, metal particles, or other impurities and belongs to a single component resin. At present, domestic steam turbine generator units, including 1000MW units, 600MW units, 300MW units, etc., all use this type of sealant.
Usage OF Generator slot Sealant 730-C
Fill the sealing groove of the joint surface with generator slot Sealant 730-C, then close the outer end cover of the generator, and evenly tighten the bolts. Then use the glue injection tool to inject 730-C sealant into the sealing groove (glue injection method: select a glue injection hole and slowly inject it, then flow out from adjacent holes. Inject in sequence until all are filled).
generator slot Sealant 730-C should be placed in a clean, dry, and well ventilated warehouse, and should be well protected from sun, rain, heat, and pressure. Do not approach heat sources or be exposed to sunlight.
REGULAR MODELS
alkali-free fiberglass tape ET100
polyester varnished glass cloth tape 2440
epoxy glass fiber board 3240
High Temperature sealing grease MFZ-2
High Temperature sealing grease MFZ-3
generator sealant injector KH-32
silicon sealant 750-2
turbine generator carbon brush 25.4*38.1*102mm
insulating box filling adhesive J0978
LR anti-corona varnish Y130
PRODUCT PICTURE
RELATED PRODUCTS
HR anti-corona varnish 1244 | Polyester fiberglass tape | epoxy paulownia glass powder mica foil 5440-1 | Insulation Parts |
Please contact us if your need is not listed above. SEND EMAIL
sealant, Sealant manufacturer, Slot Sealant, groove sealant