FTV-A-1 Endoscopic flame monitoring device FTV Lens Tube has been widely and successfully applied in oil fired furnace, gas fired furnace, pulverized coal fired furnace, sulfurized bed and Incineration furnace in petrochemical, power and other departments.

 

 

The FTV-A-1 Endoscopic flame monitoring device FTV Lens Tube is mainly aimed at practical situations that are difficult for operators to fully grasp the working conditions inside the furnace, such as whether the insulation layer inside the furnace is damaged, whether there is a pipe explosion in the water-cooled wall, whether the flame is too long and causes "pipe licking" phenomenon, the working status of each nozzle at the furnace bottom, the atomization situation of the nozzle, and whether the ratio of fuel and air input is reasonable, etc, These situations are not observable by the operator, so the operator can only rely on subjective judgment to carry out complex operations, which shortens the service life of the boiler. Moreover, due to unreasonable operation, environmental pollution, waste of energy, and inadequate guarantee of employee safety, the enterprise has suffered certain losses.

 

The FTV-A-1 Endoscopic flame monitoring device FTV Lens Tube is adopted, and the periscope lens is inserted into the furnace from the upper part of the furnace wall to monitor the combustion state of the whole furnace, and enable the operator to see the true image of the flame in the furnace on the monitor screen in the control room. This device adopts new materials and new structural forms.

The main characteristics of the FTV-A-1 Endoscopic flame monitoring device FTV Lens Tube are low operating voltage, low current, high reliability, and good safety performance of the electrical control system. The electric screw propeller has the advantages of compact and compact structure, stable and reliable operation.

 

 

 

Electrical actuator with motor ZHB1600-25

SENSOR MAGNETIC SPED SZCB-02

WINDING TEMPERATURE INDICATOR BWR-906H

(ignition gun) of XDH-20C XDZ-1-4000/18

CPU card PCA-6740

Gap system air pipe GJCFL-15

Module Vibration HY-5V

INTELLIGENTREVERSAL ROTATING SPEED MONITORING DEVICE JM-C-3ZF

Signal Converter GJCF-6A

Positioner V18345-1010121001 TZIDC

THERMO EXPANSION MONITOR (0-50mm) DF9032

Speed Sensor SZ-6

IGNITER 3000 MM

SPEED SENSOR HRY1-A100-B02-C02-D05-E080

probe 2401B-0.01

LVDT Position Sensor TDZ-1G-03

Gap Power Supply GJCD-15

Rotation Speed Probe DF6101

LVDT Position Sensor HL-3-300-15

Rotation Speed Probe CS-1

CIO Input/Output Card PC D235

LVDT 3000TD

MAIN CARD FOR ELECTRIC ACTUATOR RJ-80

Magnetic Liquid Level Indicator UHC-DB

POSITIONER VALVE V18345-1010521001

Magnetic Speed Sensor SMCB-01-16L

LVDT Position Sensor TDZ-1B-02

Dual channel Turbine Heat expansion monitor DF9032

Rotation Speed Sensor SZCB-01

LVDT Position Sensor HTD-100-3

DFYLSYC-2023-07-20-A