China manufacturer and supplier Generator slot Sealant SWG-1

Date:2023/6/29 9:48:49 Visits: Author:Dongfang YOYIK Engineering Co; Ltd,

China manufacturer and supplier Generator slot Sealant SWG-1

 

DESCRIPTION

 

Generator slot Sealant SWG-1 is suitable for sealing hydrogen grooves on generator end covers. In addition to generator end covers, it can also be used for flat sealing of steam, water, and oil on coolers and various flanges. It is a single component synthetic rubber that does not contain dust, metal particles, or other impurities. This sealant is used for 1000MW, 600MW, 300MW units, etc.

 

PARAMETER OF Generator slot Sealant SWG-1

 

1. Before use Generator slot Sealant SWG-1, use sandcloth to remove the rust from the sealing joint surface on both sides, clean the end cover, and store dry.

2. Remove burrs.

3. Dip a cotton cloth with a little acetone to remove oil stains. To be bonded.

 

REGULAR MODELS

 

HR anti-corona varnish 1244
grease gun nipple G.NPL.BH-R1/4
sealant injector hose SPK-2C
epoxy Paulownia glass powder mica foil 5440-1
PET fiberglass tape 0.1*25
Polyester fiberglass tape 0.15*25
surface Sealant HEC750-2
slot Sealant SWG-1
surface Sealant SWG-2
sealant injector 5D463.338 T15 

  

PRODUCT PICTURE

 

 

 

 

RELATED PRODUCTS

 

Insulating Adhesives and Varnish for generator	188 red insulating varnish	53841YR Epoxy glue Solvent-free RTV adhesive	RTV epoxy adhesive DFCJ0708

 

 

 

 

Please contact us if your need is not listed above. SEND EMAIL

 

Generator,manufacturer,sealant,slot