The HQ25.600.11Z Filter element at inlet of heating pump is installed at the inlet of the main oil pump. Before the hydraulic oil enters the oil tank, it is filtered in advance to ensure that the oil entering the oil pump is a clean and impurity free fluid, allowing the main oil pump to better provide bearing oil supply, lubrication, cooling, and heating to each unit. The filter element HQ25.600.11Z has good high-temperature and wear-resistant performance, and the O-ring seal is good.

.

The HQ25.600.11Z Filter element at inlet of heating pump are organic impurities, water, and air. These impurities can cause accelerated corrosion, increase mechanical damage, reduce work efficiency, cause oil deterioration, reduce equipment service life, and in severe cases, cause oil blockage and production accidents. Used to protect specific components in the wave pressure system, installed upstream of the components to be protected in the medium pressure pipeline, to filter out solid particles and colloidal substances in the working medium, effectively control the pollution level of the working medium, and ensure the normal operation of the components.

 

The HQ25.600.11Z Filter element at inlet of heating pump is mainly made of stainless steel woven mesh, sintered mesh, and iron woven mesh. Due to the use of filter materials such as fiberglass filter paper, chemical fiber filter paper, and wood pulp filter paper, it has high concentricity, high pressure resistance, good straightness, and is made of stainless steel without any burrs, ensuring a long service life. Its structure is made of single or multiple layers of metal mesh and filter material, The number of layers and the number of mesh that make up the wire mesh during specific use depend on different usage conditions and purposes.

 

 

HP control valve atuator filter DP301EA10V/-W

oil pump filter DP602EA03V/-W

RCV actuator filter HQ25.10Z

Fuel Discharge Valve Filter CB13300-002V 1607-2

Filter SGF-H110*10FC

Duplex oil filter DQ150AW25H1.0S

Active alumina filter 30-150-219

ion-exchange resin filter HC0653FCG39Z

filter OF3-20-3RV-10

generator stator cooling water system Primary filter KLS-150T/60

resin filter HQ25.300.20Z

filter YPM660

generator stator cooling water filter SG125/0.7

FILTER ELEMENT SDGLQ-25T-16

Filter element ASME-600-150

Hydraulic Oil SuctionFilter WU-100x100-J

Duplex oil filter 2-5685-9158-99

pressure oil-return filter HQ25.600.15Z

regeneration device diatomite filter 30-150-207

Hydraulic Oil Cycle Pump Suction Filter WU-63x80-J

EH oil main pump suction filter HQ25.200.11Z

regeneration device Precision filter/regenerating filter/Precision filter AZ3E303-01D01V/-W

oil-return filter (working)/return oil filter/EH oil return filter/circulating pump oil filter DR1A401EA03V/-W

jacking oil pump suction filter SFX-660*30

FILTER ELEMENT SDGLQ-25T-32

Filter element FRD.5SL8.5X3

OUTLET FILTER SFX-660X30

Circulating oil pump oil-return flushing filter DP405EA01V/-F

filter EH30.00.003

regeneration device diatomite filter/regenerating filter/diatomite filter AZ3E303-02D01V/-W

jacking oil pump auto back-flushing oil filter ZCL-I-450-B

EH Circulating Junction filter QTL-250

lube filter 2-5685-9158-99

DFYLSYC-2023-06-13-A