The Hydraulic EH oil pump suction filter element  DS103EA100V/-W is installed at the inlet of the EH oil pump to filter out the impurity particles in the EH oil to ensure the normal operation of the oil pump and thus ensure the safe operation of the entire EH oil system.

 

During the start-up process of the power plant unit, the EH oil supply system is started relatively early. Generally, after cranking, the EH oil system will be started for oil circulation. The purpose of oil circulation in advance is to check the integrity of the oil system, purify the oil system, improve the oil quality, and adjust the oil temperature to the required temperature. At this time, the oil will first enter the oil pump and start to work, supplying oil to the bearings of each component of the power plant to ensure the normal operation of the bearings. Therefore, as an important part of the steam turbine, the oil pump needs to be the first to ensure its normal operation and no jamming and other phenomena. Therefore, it is necessary to install a filter element at the inlet of the main oil pump to ensure that the incoming oil is clean and pollution-free before entering the oil pump.

 

 

filter HC4754FKN13H

filter HC4754FKN20H

filter HC4754FKN26H

pressure oil-return filter HC4754FKP13Z

filter HC4754FKP16Z

filter HC4754FKS13H

filter HC5010F1013H

nutsch filter 1200205

Turbine#10 Primary regeneration filter 021-361-023

filter HC5020F1016H

filter HC5020F2016H

Circulating oil pump filter HC6200FKP8Z

filter HC6900FOM16H

deslagging filter HC7500SK78H

dehydration filter HC7500SWT8H

filter HC8300FKN39H

filter HC8300FKP16Z

regeneration precision filter HC8314-330.0Z

sealing oil differential pressure filter HC8314FKN39H

filter 0240D003BH3HC

lube filter HC8314FKN39H

DFYLSYC-2023-03-22-A