The Turbine Luber Oil Filter element LY-48/25W-30 is composed of several filters connected in parallel from small to large. It has the characteristics of small volume, large filtering area, simple disassembly and easy cleaning, and is used in large flow hydraulic lubrication system.

 

Before cleaning the Turbine Luber Oil Filter element LY-48/25W-30, make sure that the unit is shut down and locked down. Try not to operate in the weather with heavy dust and sand, so as to prevent impurities from entering the oil. First, simply clean the foreign matters and impurities around the oil tank. Remove the exhaust cover and press the breather valve to release the pressure in the lubricating oil. Next, you can gradually remove the bolts, cover, etc., and carefully remove the filter element first. Observe whether the filter element needs to be replaced. If not, clean it with clean oil, and then determine whether the O-ring needs to be replaced according to the situation.

 

 

filter element HP0502A10VRP01

Pressure filter element HP065-1-A10AN

Filter Element HP3202A03VNP01

Filter JCAJ007

Oil filter KLS-125T/20

Lube oil station filter LH0110D010BN3HC

Filter Element LH0330DO20BN3HC

Filter element LSHX-630X 3SN

Filter element MF100-2-P10NB

PLANT FILTER MTP-95-551

PLANT FILTER MTP-95-559

PLANT FILTER MXP-95-502

filter PALX-1269-165

Element Oil filter QF1600KM25108S

Filter Element QF1600KM2510BS

Lubricating oil filter element BFPT QF9733W25HO7C

Filter element QF9733W25HO7C-DQ

Pneumatic air filter regulator QSL-20

Oil filter RFLDW/HC661DAN25BD1

DFYLSYC-2023-02-10-A