HP Control Valve LVDT Position Sensor A2000TD-B15-C01 0-100mm-Dongfang YOYIK - Manufactures spare parts of steam turbines and generators.

HP Control Valve LVDT Position Sensor A2000TD-B15-C01 0-100mm

Date:2022/3/4 8:34:10 Visits: Author:Dongfang YOYIK Engineering Co; Ltd,

HP Control Valve LVDT Position Sensor A2000TD-B15-C01 0-100mm

The LVDT Position Sensor A2000TD-B15-C01 is powered by a DC stabilized power supply, which outputs DC voltage or current. Its input signal amplitude is large, which can be directly used for recording or displaying by recorders, digital panel meters, PLC, DCS, etc., to measure displacement or connect to the feedback system through amplifiers, so as to achieve automatic control of position closed-loop.

The LVDT Position Sensor A2000TD-B15-C01 has a measuring range of 0-100mm. Pay attention to the following points when using:

1. The space between the two lines engraved on the sensor core rod is a linear travel area, and the insertion direction of the core rod shall be in accordance with the "entrance" mark of the port;

2. The sensor should be placed vertically or horizontally to ensure that the iron core can move freely. It should not be closer than 20mm to the metal of the magnet conductor, nor close to the strong magnetic field or current, nor place the sensor partially in a closed conductor.

3. If the sensor works in a harsh environment, an anti-interference filter shall be added to the transmitter power supply incoming line.

4. TheLVDT Position Sensor A2000TD-B15-C01 is equipped with a 1m long heat-resistant wire when leaving the factory. If it needs to be lengthened, the required length can be indicated when ordering.

technical parameter

Linear impedance: 250 ± 50 Ω

Measuring range: 0~100mm

Accuracy: ± 1%

Relative humidity<90% s

Linearity: 6-wire system

HP Control Valve LVDT Position Sensor A2000TD-B15-C01 0-100mm