LX-FF14020041XR filter element made by yoyikDate:2021-3-24 18:28:10 Visits: Author:Dongfang YOYIK Engineering Co; Ltd,
Installation position and application of LX-FF14020041XR filter element:
1. The filter element should be installed at the suction port of the pump.
Surface oil filters are usually installed on the suction path of pumps in order to filter out large impurity particles to protect the hydraulic pump. In addition, the filtering capacity of the oil filters should be more than twice the flow rate of the pump and the pressure loss should be less than 0.02 MPa.
2. The filter element is installed on the outlet oil road of the pump.
The purpose of installing oil filters here is to remove contaminants that may invade components such as valves. Its filtering accuracy should be 10-15m, and it can withstand the working pressure and impact force on the oil pipeline, and the pressure drop should be less than 0.35MPa. At the same time, safety valve should be installed to prevent blockage of oil filter.
3. The filter element is installed on the oil return path of the system.
This installation acts as an indirect filter. Generally, a back pressure valve is installed in parallel with the filter. When the blockage of the filter reaches a certain pressure value, the back pressure valve opens.
4.Filter element is installed on the branch oil circuit of the system.
5.Filter Core Separate Filtration System:
A hydraulic pump and oil filter are specially designed in the large hydraulic system to form an independent filtering circuit.
oil filter WU-H100*180S
oil filter XUI-A40*50S
oil filter YQ2U-A63*10S
oil filter ZU-A25*10S
gas turbine actuator filter
Rotation Speed Sensor ZS-02
Mechanical seal LTJ100
oil filter Q2U-E100*20S
BFP lube filter QF9732W25HPTC-DQ
Adjusting Gasket with Hole
servo valve G761-3033B
circulating pump oil filter
outlet filter DQ8302GAFH3.5C
oil filter WUI-A400*50FS