Cleaning precautions of EH oil replacement filter element HC9100FKP8Z

Date:2019/12/3 18:29:57 Visits: Author:Dongfang YOYIK Engineering Co; Ltd,

Cleaning precautions of  EH oil replacement filter element HC9100FKP8Z

The cleaning of the EH oil replacement filter element HC9100FKP8Z must be performed in a non-operating state. First, check whether the inlet and outlet pipes of the oil filter have been closed and whether the power switch has been turned off.

2. After confirming that the power switch has been turned off, open the oil drain valve and air vent valve to allow the residual oil in the vacuum filter to flow out until the oil is completely clean.

3. Prepare the oil pan filled with kerosene in advance, open the filter cover, take out the filter element of the oil filter and put it in kerosene, soak it for about half an hour, rinse it twice with water and blow dry.

4. Use a brush to remove all the sediment that can be seen on the filter, and then wipe it with a rag.

5. Finally, put the filter element back into the filter and screw the bolts.

Maintenance management

1) Check the filter element for blockage.

2) If there is no blockage, replace the filter element or clean it within 1 to 3 months. At the same time, drain the dirty oil from the casing and clean the inside.

3) Replace the filter regularly.

4) Do not bring in foreign objects.

 

 

filter,element,EH,Oil,replacement,oultet