RTV potting Heat conduction adhesive 801 for yoyik
Date:2019/6/11 16:34:49 Visits: Author:Dongfang YOYIK Engineering Co; Ltd,RTV potting Heat conduction adhesive 801 is composed of A and B components. It is suitable for filling the gap between silicon steel sheet and seat wall after lamination of stator core.
Test method
1.Appearance: Observe and evaluate with naked eye.
2.Curing time: After mixing and stirring uniformly according to weight ratio, pour it on the polyester film, leveling naturally, drying for 48 hours at room temperature of 25℃ (+0.5℃). Touch the surface of the adhesive by hand, and the adhesive is not sticky to the hand.
3.Viscosity: After mixing and stirring uniformly according to weight ratio, the viscosity was measured by rotating viscometer at 25 ℃+0.5℃.
T4.hermal conductivity: tested according to GB10294 thermal protection method.
Packaging and Storage
From the date of manufacture, the storage period is 6 months at room temperature, and it can continue to be used after the storage period has passed the inspection.
insulating box filling adhesive 796
insulating filling adhesive J9701 AB
insulating filling adhesive J9702 AB
red epoxy Modified coating varnish EP5
DFSYC-2019-06-11-A