YOYIK sell hiqh quality DFSS-2 turbine high pressure cylinder seal grease

Date:2018/6/1 16:54:31 Visits: Author:Dongfang YOYIK Engineering Co; Ltd,

YOYIK sell hiqh quality DFSS-2 turbine high pressure cylinder seal grease

 

Turbine high pressure cylinder seal grease DFSS-2 is MF upgrading product. It is specially used for sealing the joint of power station and industrial steam turbine cylinder body. It is a single component without solvent and 100% solid content. No asbestos, halogen and other harmful components to the human body, can withstand high temperature, its performance index can fully meet the operating requirements of the units below 300MW or more than 600MW; it can be used alone, and can also be used in combination with copper asbestos gaskets for high temperature sealing of other high temperature hot stove flanges.

 

Turbine high pressure cylinder seal grease DFSS-2 Usage method：

1. cylinder surface should be clean, and no oil, foreign matter and dust should be left.

2. after full mixing and uniform, the seal fat is coated on the cylinder cylinder of the cylinder with thickness 0.5-0.7mm, and a certain size should be left around the screw hole and the inside of the cylinder to prevent the seal from entering the flow system.

3. after fastening the bolts, wipe off the grease from the outer parts.

4. after the cylinder is closed, there is no need to wait for the static position. When the unit starts to heat up, the sealing grease will solidify.

Characteristic：

1. high temperature and high pressure performance, to prevent leakage.

2. steel seal, toughness, no shrinkage, vibration resistance, heat shock resistance, no creep.

3. good compactness and long-term tolerance to various high temperature and high pressure fluid erosion.

4. high temperature steam and other chemical media corrosion, not damage cylinder surface, not easy to deformation.

5. no asbestos and halogen, environmental protection non-toxic and pollution-free.

 

The same series of products are:   

RTV epoxy adhesive         J0139

Pole core surface insulating varnish        J0405

RTV HR anti-corona varnish    J0701

RTV potting adhesive       J0704

insulating plate        J0707

RTV potting Heat conduction adhesive   J0801

RTV Heat conduction Semiconductor putty    J0901

high strength insulating box J0911

insulating box filling adhesive 796

insulating filling adhesive         J9701 AB

insulating filling adhesive         J9702 AB

Conductive Slot liner        J1008

air-drying red insulating varnish      J1030

dryer         J1213

alkali-free glass fiber strip       J1319

epoxy grey insulating varnish  J1338

HR anti-corona varnish    J1345

red insulating varnish      J1348

LR anti-corona varnish     EP1

red epoxy Modified coating varnish         EP5

F-class Modified epoxy dipping adhesive         FJ1840

Pole core surface insulating varnish        J0405

epoxy adhesive         132

epoxy novolac Silicon steel sheets varnish      133

insulating box filling adhesive 135

DFCL-2018-6-1