The main functions of the China offers PC D231B Excitation Rectifier Bridge Control Interface Card are as follows:

Excitation control: The excitation rectifier bridge control interface board can be used to control the operation of the excitation rectifier bridge. Excitation refers to the application of a certain amount of current to the excitation coil of a motor or generator to generate a magnetic field, thereby achieving the normal operation of the motor or generator. The control interface board can provide appropriate control signals to the excitation rectifier bridge, adjust the magnitude and direction of excitation current, and adapt it to different operating states and load requirements.

Rectification control: The rectifier bridge plays a role in converting alternating current into direct current in the generator. The excitation rectifier bridge control interface board can control the current and voltage output of the rectifier bridge to achieve stable control of the direct current output of the generator. It can monitor, regulate, and protect the operation of the rectifier bridge to ensure the quality and stability of the output DC power.

Communication interface: The excitation rectifier bridge control interface board usually also has a communication interface, which can exchange data with the upper computer or other control systems. Through these interfaces, functions such as remote monitoring, parameter setting, fault diagnosis, and remote control of the operating status of the excitation rectifier bridge can be achieved.

Protection function: The excitation rectifier bridge control interface board usually also has multiple protection functions to protect the safe operation of the excitation rectifier bridge and related equipment. For example, it can have protection functions such as overvoltage, overcurrent, over temperature, short circuit, etc. When abnormal situations are detected, corresponding protective measures will be taken in a timely manner to avoid equipment damage or safety accidents.

Overall, the PC D231B Excitation Rectifier Bridge Control Interface Card is a key component used to control and monitor the operation of the excitation rectifier bridge. By providing control signals, data exchange, and protection functions, it ensures the normal operation and safety of the generator or motor. The specific functions may vary depending on different devices and applications.

 

 

Rotation Speed Sensor ZS-03

Rotation Speed Sensor ZS-02

LVDT Position Sensor HTD-50-6

LVDT Position Sensor HTD-250-6

LVDT Position Sensor HL-6-300-15

LVDT Position Sensor HL-3-200-15

Gap Sensor Probe GJCT-15-E

Gap Sensor Cable GJCL-15

Gap system air pipe GJCFL-15

Bellows GJCFB-15

Signal Converter GJCF-6A

Gap Power Supply GJCD-15

Rotation Speed Sensor CS-3F

Rotation Speed Sensor CS-3

Rotation Speed Sensor CS-2

Rotation Speed Sensor CS-1 D-065-05-01

Sensor 2000TD

Rotation Speed Probe DF6101

Rotation Speed Monitor DF9011

LVDT Position Sensor TD-1 0-100

Thermal Resistance WZPM-201

Thermocouple WRN2-630

LVDT Position Sensor HTD-100-3

Current/Voltage Converter LJB1 5A/10V 0.5

LVDT Position Sensor HL-6-250-15

RTD temperature probe WZP2-231

APPROORIATIVE POWER SUPPLY GJCD-16

Pt100 temperature probe WZPM2-001

Case Expansion Transducer TD-2

Armored Thermocouple WREK2-294

TEMPERATURE SENSOR WZP2-221

CPU card PCA-6740

DFYLSYC-2023-07-17-A