China manufacturer and supplier sealant injector hose SPK-2C

Date:2023/6/27 9:33:58 Visits: Author:Dongfang YOYIK Engineering Co; Ltd,

China manufacturer and supplier sealant injector hose SPK-2C

 

DESCRIPTION

 

The sealant injector hose SPK-2C is a hose imported from Japan. It is the connection between the manual glue gun and the generator end cover for sealing hydrogen sealant on the generator end cover. It is mainly used for the hydrogen cooled generator in Fossil fuel power station to fill sealant. The glue injection speed can be adjusted as required. The glue injection gun hose SPK-2C is made of high-quality PVC, with good corrosion resistance, economic use, good safety and convenient control.

 

PARAMETER OF SEALANT INJECTOR HOSE SPK-2C

 

The operating temperature of the glue injection gun hose SPK-2C is between 10~50 ℃, the air pressure is between 0.6~0.9MPa, and the air volume is not less than 1m ^ 3/min. Before each use of the glue injection gun, open the valve cover and check whether the locknut on the adjusting screw is loose. If it is loose, tighten it. When it is empty, check whether the glue injection gun is normal.

 

REGULAR MODELS

 

sealant injector nozzle 5D463.338 T15C
end cap Sealant 53351JG
Sealant D25-66
Sealant D20-66
Hydrogen sealing Sealant D20-75
High Temperature Sealant COPALTITE LIQUID 5 Oz.
High Temperature Sealant COPALTITE LIQUID 1 QUART
High Temperature Sealant COPALTITE CEMENT 5 Oz.
High Temperature Sealant COPALTITE CEMENT 1 QUART
sealant D2075

 

  

PRODUCT PICTURE

 

 

 

 

RELATED PRODUCTS

 

Insulating Adhesives and Varnish for generator	188 red insulating varnish	53841YR Epoxy glue Solvent-free RTV adhesive	RTV epoxy adhesive DFCJ0708

 

 

 

 

Please contact us if your need is not listed above. SEND EMAIL

 

spares,supplier,gun,injector,hose,sealant