The generator stator cooling water filter element KLS-100I of the cooling water pump is an advanced and easy to operate water filter element, driven by an electric motor for automatic cleaning. Water enters the coarse filter screen from the inlet and flows out through the fine filter screen from the inside out, causing impurities to accumulate on the surface and causing an increase in pressure difference. The coarse filter screen is designed to protect the cleaning device from damage caused by large particles. The filter starts the automatic cleaning process when the preset pressure difference or time expires. Filter cleaning is carried out through a rotating suction scanner, which sucks impurities away from the filter and discharges them through a drain valve. The entire process takes about 15-40 seconds, with continuous flow during this time.

The generator stator cooling water filter element KLS-100I is used to remove impurities and dirt from the cooling water to protect an important part of the generator stator. To ensure the effectiveness and long-term use of the generator stator cooling water filter element KLS-100I, the following points need to be noted:

Regular replacement of filter element: The stator cooling water filter element needs to be replaced regularly to ensure its filtering effect. In general, it is recommended to replace it at regular intervals (such as every three months)

Pay attention to the applicability of the filter element: When selecting the filter element, it is necessary to pay attention to its applicability to ensure that the selected filter element can adapt to the current water quality and usage conditions

Regular inspection: It is necessary to regularly check the effectiveness of the stator cooling water filter element, such as the degree of pollution and filtering effect of the filter element, and promptly identify and handle problems

Ensure normal water supply: The stator cooling water filter element can only function normally under normal water supply conditions, so it is necessary to ensure the water supply and quality of the cooling water.

In summary, the stator cooling water filter KLS-1001 is an important protective component of the generator and requires regular maintenance and replacement to ensure the normal operation and service life of the generator.

 

Stator water filter KLS-125T/20

generator stator cooling water filter SGLQ-600A

jacking oil pump discharge filter DQ8302GAFH3.5C

Hydraulic Oil Cycle Pump Suction Filter WU-63x80-J

lube filter LY-10/10W-40

lube filter LY-15/25W

oil pump discharge working filter/EH oil pump filter/Main pump filter/EH pump discharge oil filter/oil pump filter DP602EA03V/-W

Duplex oil filter DQ150AW25H1.0S

Filter disc SPL-15

oil pump suction filter JCAJ007

Filter SPL-25C

EH pump flushing filter DP1A601EA01V/-F

regeneration oil pump suction filter HQ25.300.12Z

Oil purifier Circulating filter HC8314FKN39H

jacking oil pump suction filter DQ6803GA20H1.5C

generator stator cooling water filter WFF-125-1

filter OF3-20-3RV-10

Filter element WU-6300*1200

actuator filter with o-ring AP1E102-01D01V/-F

MSV/CV actuator filter HQ25.11Z

precision filter JLX-45

dehydration filter TX-80

Circulating oil pump oil-return flushing filter DP405EA01V/-F

EH oil pump discharge filter QTL-6027A

Precision filter AZ3E303-01D01V/-W

actuator filter QTL-6021A

lube filter LY-38/25W

generator stator cooling water filter SG125/0.7

regeneration precision filter HQ25.300.16Z

Filter QTL-63

Filter 21FH1330-60.51-50

jacking oil pump suction filter SFX-850*20

Coarse filter CLX-75

DFYLSYC-2023-06-15-A