The high pressure Hydraulic oil filter element LX-HXR25X20 is installed on the pressure pipeline of the hydraulic system to remove or prevent the mechanical impurities mixed in the hydraulic oil and the colloid, bitumen, carbon residue, etc. produced by the chemical change of the hydraulic itself, so as to prevent the valve core from being stuck. , blockage of throttle holes, gaps and damping holes, and rapid wear of hydraulic components.

The high pressure Hydraulic oil filter element LX-HXR25X20 is equipped with a pressure difference transmitter. When the filter element is polluted and blocked to a pressure difference of 0.35 MPa between the inlet and outlet, it will send a switch signal. At this time, the filter element should be cleaned or replaced to achieve the purpose of system safety. The filter is also equipped with a bypass check valve. When the filter element is polluted and blocked to a pressure difference of 0.4MPa, or other reasons cause the pressure difference between the inlet and outlet of the filter to be too large, the bypass valve can be automatically opened to the system. Or when replacing the filter element, in order to prevent the system oil backflow and prevent the oil loss of the pressure line, avoid air and pollutants from entering the system, and make the oil flow reversely without filtering, the reverse flow rate is 1/4 of the nominal flow rate one.

 

 

diatomite filter A156.73.43.06

oil tank top filter A156.73.52.08

cellulose filter A156.73.43.10

actuator filter B156.33.42.08

EH oil pump oil-absorber inlet filter C156.73.41.42

diatomite filter C156.73.43.01

cellulose filter C156.73.43.07

EH oil pump discharge filter C156.73.52.02

EH oil pump discharge filter C156.73.52.08

cellulose filter JCAJ010

EH regeneration device resin filter JCAJ043

regeneration filter JCAJ063

precision filter WU6300*600

precision filter WU6300*400

precision filter WU6300*200

Coarse filter WU400*200

generator stator cooling water filter DSG-125/08

ion-exchange resin filter HQ25.600.20Z

EH oil main pump suction filter HQ25.200.11Z

regeneration oil pump suction filter HQ25.200.12Z

pressure oil-return filter HQ25.200.15Z

EH oil main pump suction filter HQ25.300.11Z

Circulating oil pump suction filter HQ25.300.13Z

DFYLSYC-2023-03-21-A