Stator cooling water conductivity meter 2402B

Date:2018/12/11 17:40:42 Visits: Author:Dongfang YOYIK Engineering Co; Ltd,

Stator cooling water conductivity meter 2402B

Conductivity meter 2402B is manufactured with a differential sensor. The element consists of two magnetically sensitive semiconductor resistors in series on the magnet. The materials and geometrical dimensions of the two semiconductors are the same. In the sensor circuit, the two resistors form a differential inductance bridge. By measuring this voltage, the gap between the measured object and the probe of the sensor can be obtained.

The Stator cooling water conductivity meter 2402B is mainly used to measure the ability of liquid medium to transmit current.

If the Stator cooling water conductivity meter 2402B displays a temperature of 25 C. Usually, the following situations occur:

A. The "temperature compensation mode" in the instrument is set to manual by mistake;

B. The PT100 signal wire from the electrode to the back of the meter is wrongly connected or not connected properly;

C. PT100 in the electrode is broken.

 

Conductivity Meter Gauge 2401B-0.01 K=0.01 

Excitation Regulator Power Supply Module 3BHB006449R0002

Exciter GDI Card 3BHB006338R0001

Pressure Switch 02-139479

TSI Card 3500/42M

meter,conductivity,measure,liquid,medium