Brush Gear Assembly

Date:2016/7/13 10:32:02 Visits: Author:Dongfang YOYIK Engineering Co; Ltd,

China Manufacturer Generator Brush Gear Assembly

 

 

DESCRIPTION

 

The performance of the brushgear assembly has the following requirements:

- Maintain the stability of the brush
- Easy to assemble and disassemble the brush when checking or replacing the brush
- Can adjust the exposed part of the brush to protect the commutator or collector ring from grinding
- The change of brush pressure, pressure direction and pressure position has small effects on the brush wear, and the structure is firm.
- The material has good mechanical strength, processability, corrosion resistance, heat dissipation and electrical conductivity.

 

Brushgear Assembly Structure:

Brush holder, brushgear housing, brush handle, brush box, brush holder spring, carbon brush, brush lead, brush ring, brush lead.

 

 

REGULAR SPARES OF BRUSH GEAR ASSEMBLY

 

Brushgear Housing

Brush Handle

Brush Holder

Brush box

Carbon Brush

Generator carbon brush

Brush holder spring

DC Motor carbon brush

 

 

PRODUCT PICTURE

 

 

 

 

Attentions In Use

 

Carbon brush should be checked regularly. Brush is vulnerable parts, it is necessary to regularly clean the dust on the brush, so that the brush keeps good working condition. When the brush wears too much, it should be replaced in time.

 

Pay attention when replacing carbon brushes:

1. new brushes must have same specification as the original brush, so as to keep the brush in good contact with the collector ring.
2. carbon brushes on the same grade brush bar should be replaced together to make it contact with the surface of the collector ring well.
3. after replacing the new brush, it must be ground and then operated under a light load (1/3-1/4 of rated load) to smooth the contact surface and then use it normally.

 

 

Please contact us if your need is not listed above. SEND EMAIL